Process Instructions
Process instructions for the syringes:
* Store the syringe in the refrigerator until you are ready to use it.
* Let the syringe warm up to room temperature before using.
* Shake the syringe if the mycelium is clumped up before using.
Process instructions for injecting All-in-one grow bags:
* Unfurl the bag.
* Do NOT remove the tape over the injection port.
* Clean the injection port area with rubbing alcohol.
* Inject through the tape into the grain.
* After injection, tape over the injection site with a fresh piece of tape.
* Keep the bag in the dark but allow it to breathe.
* Keep in temperatures around 70-75F.
* When the grain is about half way colonized, carefully mix the grain
only and place the bag back in the dark.
* Once the grain is fully colonized, then mix the entire bag.
* After a couple weeks, mix the bag once more and then let it colonize
almost completely if you want to do a monotub, or let it colonize fully
and place it in a fruiting tub.
Process instructions for grain spawn bags:
* Do NOT remove the tape over the injection port.
* Clean the injection port area with rubbing alcohol.
* Inject through the tape into the grain.
* After injection, tape over the injection site with a fresh piece of tape.
* Keep the bag in the dark but allow it to breathe.
* Keep in temperatures around 70-75F.
* When the grain is about half way colonized, carefully mix the grain
only and place the bag back in the dark.
* Once the grain is fully colonized, it is read tomix with a substrate.
Process instructions for the pre-injected bag:
* Unfurl the bag.
* No need to mix the bag, it was just done.
* Keep the bag in the dark but allow it to breathe.
* Keep in temperatures around 70-75F.
* Bag should be ready for monotub or fruiting
tub in about a month or so.